SC810 UHT POLYMER RETARDER
Product Description
1.SC810 is a ultra-high temperature polymer retarder, which helps extend the thickening time of cement slurry in order to keep it pumpable, and ensures sufficient pumping time for a safe
cementing project.
2.Thickening time has a linear relation with the dosage and temperature. The Right-Angle thickening curve can be achieved.
3.Strength of set cement develops fast.
4.Use below 204.4℃ (400℉, BHCT).
5.Has good compatibility with polymer fluid loss additive, and little effect on high temperature fluid loss performance.
6.SC810 series consists of L-type liquid, L-A type anti-freezing liquid, P-P type high purity powder, P-D type dry-mixed powder and P-T type dual-use powder.
Specifications
|
Type |
Appearance |
Density,g/cm3 |
Water-Solubility |
|
SC810L (standard type) |
White or faint yellow liquid |
1.10±0.05 |
Soluble |
|
SC810L-A (anti-freezing type) |
White or faint yellow liquid |
1.15±0.05 |
Soluble |
|
Type |
Appearance |
Density,g/cm3 |
Water-Solubility |
|
SC810P-P |
White or faint yellow powder |
0.80±0.20 |
Soluble |
|
SC810P-D |
Grey powder |
1.00±0.10 |
Partly soluble |
|
SC810P-T |
White or faint yellow powder |
1.00±0.10 |
Soluble |
Recommended Dosage
|
Type |
SC810L(-A) |
SC810P-P |
SC810P-D |
SC810P-T |
|
Dosage Range (BWOC) |
2.0-8.0% |
0.5-2.5% |
1.5-4.0% |
1.5-4.0% |
Cement Slurry Performance
|
Item |
Test condition |
Technical Indicator |
|
Initial consistency, Bc |
180℃/73min, 115mPa |
≤30 |
|
40-100Bc thickening time, min |
≤40 |
|
|
Thickening time adjustability |
Adjustable |
|
|
Sudden change value of consistency, Bc |
≤10 |
|
|
Free fluid, % |
≤1.4 |
|
|
Compressive strength for 24h, mPa |
180℃, 20.7mPa |
≥14 |
|
Composition: API Class G(HSR) 600g, silica flour 210g(35%), silica fume 36g(6%), mixed water 342g(including liquid additives), defoamer 1.8g(0.3%), SC810. |
||
|
Note: The dosage of SC810 is determined under te precondition of adjusting the thickening time range of cement slurry at 180℃ to 230-420 min. |
||
Standard Packaging and Storage
1.The liquid type products should be used within 12 months after production. Packed in 25kg, 200L and 5 US gallon plastic barrels. P-P/D type powder products should be used within 24
months and P-T type powder product should be used within 18 months after production. Packed in 25kg bag.
2.Customized packages are also available. Once expired, it shall be tested before use.
Package
25KG/BAG or as you request.
Storage
Store at a ventilated, dry place.
Executive Standard
International Standard.
