-
Epoxy Resin
Product Description: Epoxy resin CC958 is an undiluted clear difunctional bisphenol A/epichlorohydrin derived liquid epoxy resin. When cross-linked or hardened with appropriate curing agents, very good mechanical, adhesive, dielectric and chemical resistance properties are obtained. Because of this versatility, epoxy resin CC958 has become a standard epoxy resin used in formulation, fabrication and fusion technology. Benefits . Fiber reinforced pipes, tanks and composites . Tooling, cast... -
Monomer Acid
Product Description: Monomer acid, also called Monomer fatty acid. It is white soft paste in room temperature. Main properties 1.Non-toxic, slightly irritant. 2.Can be dissolved in many kind of organic solvent, insouble in water. 3.Can be used to produce many kinds of high value chemical products based on its unique molecular structure. Application Monomer acid can be used to produce Alkyd resin, Isomeric stearic acid, Cosmetics, Surfactant and Medical intermediate. Product Specificat... -
Reactive Polyamide Resin
Product Description: Uses: It can be used in pipe surface as anti-corrosion coating, apply for epoxy primer, and the coated mortar. It is also widely used in epoxy glue, antirust paint and antisepsis coatings and so on. Performance: It has good curing properties, good adhesion, do not easy to peel off, with good bending properties and excellent resistance to impact resistance. It has wider range than epoxy resin and easy to operate. Product Specification: Index Performance 650 ... -
Polyamide Hot-melt Adhesive
Product Description: No. Characteristics No. Application 1 Stable characteristic, good flexibility 1 Leather, fabric and heat sealing coating 2 High strength adhesive 2 Cable thermal shrinkable sleeve 3 Excellent high temperature and low temperature resistance 3 Car, electric etc. Product Specification: Grades Acid value (mgKOH/g) Amine value (mgKOH/g) Viscosity (mpa.s/25°C) Softening point (°C) Freezing point (°C) Color (Gardner) CC-3150... -
Polyamide Curing Agent
Product Description: Features: polyamide curing agent is vegetable oil and ethylene amine dimer acid synthesis, when be mixed with epoxy resin this curing agent has the following advantages: At room temperature, it has good curing properties. It has good adhesion, hard to peel off, with good bending properties and excellent resistance to impact resistance. It has excellent insulating properties. It has a wide ratio rang with epoxy resin. It is easy to operate and has long operate period.... -
Polyamide Resin | 63428-84-2
Product Description: Polyamide resin is yellowish granula transparent solid. As a non-reactive polyamide resin, it is made from dimer acid and amines. Product Application: No. Characteristics No. Application 1 Stable characteristic, good adhesion, high gloss 1 Gravure and flexographics plastic printing ink 2 Good compatible with NC 2 Over print varnish 3 Good solvent release 3 Adhesive 4 Good resistance to gel, good thaw property 4 Heat ... -
Dimer Acid | 61788-89-4
Product Description: Dimer acid is light yellow transparent viscous liquid. It is a kind of dicarboxylic acid, which is made from oleic acid via polymerization and molecular distillation. Main properties 1.Stable performance, less volatile 2.Do not gel at low temperature, good fluidity 3.Non-toxic, high flash point and flare point, good security 4.Can be dissolved in many kind of organic solvent, insouble in water 5.Can be used to produce many kinds of high value chemical products based ... -
Waterborne Polyurethane Resin
Product Description: Waterborne polyurethane resin is anionic aliphatic polyurethane aqueous dispersion copolymerized by aliphatic isocyanate and polyhydric alcohols. It has features of: Non-toxic, solvent free, no odor, formaldehyde-free and no DMF; Excellent cold resistance and flexing endurance; Excellent wear resistance, drying property; Excellent elongation; Applied in middle and high grade sofa leather, garment leather and instep leather; Can be used together with other anionic res... -
Dimethyl thio-toluene diamine (DMTDA) | 106264-79-3
Product Description: DMTDA is new-model polyurethane elastomer curing cross-linking agent, which has two kinds of isomers, mixture of 2,4- and 2,6-DMTDA (proportion is about 77~80/17~20). Compared with common MOCA, it is lower-viscosity liquid at normal temperature, it has features such as low temperature operation and low dosage, etc. Package: 25 kgs/bag or as you request. Storage: Store at a ventilated, dry place. Executive Standard: International Standard. -
Diethyltoluenediamine (DETDA) | 68479-98-1
Product Description: This product is same as Ethacure 100 and Lonza DETDA80. It is a good chain extender of PU elastomer, especially for RIM and SPUA. and used as curing agent of polyurethane and epoxy resin; also used as antioxidant in epoxy resin; industrial oil, lubricant. In addition, it can be used as organic synthesis intermediates. Package: 25 kgs/bag or as you request. Storage: Store at a ventilated, dry place. Executive Standard: International Standard. -
Nitrocellulose Chips | 9004-70-0
Product Description: Nitrocellulose chips (CC & CL type) is small white flaky that can be liquefied in organic solvents such as ketone, esters,alcohol etc. Its density is 1.34g/m³.Its explosion point is 157℃. Nitrocellulose chips is flammable material, decomposed under heat and reacts with acid and alkali. Main character: 1.No organic volatile. 2.No alcoholism, no reaction with PU. 3.100% solid content . 4.80% Nitrocellulose component. 5.Lowest moisture rate, higher brightness. 6.Use... -
Nitrocellulose | 9004-70-0
Product Description: Nitrocellulose(CC & L type) is a resin widely used in the production of paints and varnishes, delivering ease of application and fast drying properties to those products. COLORCOM CELLULOSE who is nitrocellulose manufacturer offers customers the best quality of Ethanol damped nitrocellulose and IPA damped nitrocellulose for use in the lacquers for wood, paper, coating, printing ink, aircraft lacquer, protective lacquer, aluminum foil coating and etc. Becau...
