Non-leafing Metallic Effect Aluminium Pigment Powder | Aluminium Powder
Description:
Aluminium Pigment Powder, commonly known as "silver powder", i.e. silver metallic pigment, is made by adding a small amount of lubricant to pure aluminium foil, crushing it into a scale-like powder by pounding and then polishing it. Aluminium Pigment Powder is light, with high leafing power, strong covering power, and good reflecting performance to light and heat. After treatment, it can also become non-leafing aluminium Pigment Powder. Aluminium Pigment powder can be used to identify fingerprints, but also to make fireworks. It can also be used for all kinds of powder coatings, leather, inks, leather or textiles, and so on. Aluminium Pigment Powder is a large category of metallic pigments because of its wide use, high demand and many varieties.
Characteristics:
Aluminium pigment powder has flake shape particles. The particles float at the surface of finished coatings, forming a shield to against corrosive gases and liquids, it provide continuous and compact surface of coated articles. Aluminium pigment encapsulated with material of strong weather ability can endure long time corrosion of sun light, gas and rain, thus it provides excellent protection to coatings.
Application:
Mainly used in various of powder coating, masterbatches, coatings, inks, leather and so on, apply to outdoor coatings.
Specification:
|
Grade |
Non-Volatile Content (±2%) |
D50 Value (μm) |
Sieve Residue (44μm) ≤ % |
Surface Treatment |
| LP0210 |
95 |
10 |
0.3 |
SiO2 |
| LP0212 |
95 |
12 |
0.3 |
SiO2 |
| LP0212B |
95 |
12 |
0.3 |
SiO2 |
| LP0215 |
95 |
15 |
0.5 |
SiO2 |
| LP0218 |
95 |
18 |
0.5 |
SiO2 |
| LP0313 |
96 |
13 |
0.3 |
SiO2 |
| LP0316 |
96 |
16 |
0.5 |
SiO2 |
| LP0328 |
96 |
28 |
1 |
SiO2 |
| LP0342 |
96 |
42 |
1(124μm) |
SiO2 |
| LP0354 |
96 |
54 |
1(124μm) |
SiO2 |
| LP0618 |
96 |
18 |
0.5 |
SiO2 |
| LP0630 |
96 |
30 |
1 |
SiO2 |
| LP0638 |
96 |
38 |
1(60μm) |
SiO2 |
| LP0648 |
96 |
48 |
1(124μm) |
SiO2 |
| LP0655 |
96 |
55 |
1(124μm) |
SiO2 |
Notes:
1.Please test the product quality before using.
2.Avoid any conditions that will suspend or float powder particles in the air, keep away from high temperature, fire during using process.
3.Tighten the drums cover of the product soon after using it, storage temperature should be at 15℃- 35℃.
4.Store in cool, ventilated, dry place.After long time storage, the pigment quality might be changed, please re-tested before using.
Emergency measures:
1.Once a fire breaks out , please use chemical powder or the fire-resistant sands to put it out.No water should be used to put out the fire.
2.If the pigment enters eyes by accident , should wash them with clean water for at least 15minutes and turn to doctor for consultation in time.
Waste treatment:
Small amount of discarded aluminium pigment can only be burnt in a safe place and under the supervision of authorized persons.
