-
Methylene Chloride | 75-09-2
Product Description: Colorless liquid. It smells like ether and easy volatile .The gas is not burning, it mixed with air also not explosion. The miscibility of methylene chloride can be achieved with ethanol, ethyl ether and N, N – dimethyl formamide. Methylene chloride soluble in about 50 share of the water. The relative density (d204) 1.3255 , freezing point – 95 °C, boiling point 39.75 °C. Refractive index (n20D) 1.4244. Low poison, half lethal dose is (rats, by mouth) 2524 mg/kg. High ste... -
Isopropylamine | 75-31-0
Product Description: It is an important organic synthetic material and pesticide intermediate.It is used as solvent,emulsifying agent,surface-active agent,rubber sulphating accelerator and etc. Product Specification: Items Standard MIPA Content ≥99.50% Diisopropylamine ≤0.1% Isopropanol ≤0.1% Acetone ≤0.1% Ammonia ≤0.1% Moisture Content ≤0.1% Color ≤15 Package: 180KGS/Drum or 200KGS/Drum or as you request. Storage: Store at a ventilated, dry place. Executive Standard: Inte... -
Methyl Methacrylate | 80-62-6
Product Description: MMA is mainly applied in polymerization and copolymerization field. A specific polymerizing process should be adopted for every application with radical initiators (organic peroxides azoic compounds) or ion initiators. Plexiglass can be made by means of MMA block polymerizing, and be used as ornamentals pre-fabricated parts for architectural industry, light transmission materials and seals for electrical pars etc. Product Specification: ITEMS SPECIFICATIONS Appearanc... -
Methyl Ethyl Ketone | 78-93-3 | MEK
Product Specification: ITEM UNIT SPECIFICATIONS Purity % 99.7 Min. Water % 0.05 Max. Non-volatile matter mg/100ml 5.0 Max. Color APHA 10 Max. Distillation range ℃ 78.5 – 81.0 Acidity % 0.003 Max. Package: 180KGS/Drum or 200KGS/Drum or as you request. Storage: Store at a ventilated, dry place. Executive Standard: International Standard. -
Cyclohexanone | 108-94-1
Product Specification: Items Standard Purity 99.8%min Acidity (as acetic acid) < 0.01% Moisture < 0.08% Distillation range (0℃, 101.3kpa), ℃ 153-157 Temperature interval when distilling 95ml, ℃ < 1.5 Density g/cm3 0.946-0.947 Color (Pt-Co) < 15 Package: 180KGS/Drum or 200KGS/Drum or as you request. Storage: Store at a ventilated, dry place. Executive Standard: International Standard. -
N, N-dimethylformamide | 68-12-2
Product Description: N,N-dimethylformamide is a very good aprotic polar solvent that can dissolve most organic and inorganic substances and is miscible with water, alcohols, ethers, aldehydes, ketones, esters, halogenated hydrocarbons and aromatic hydrocarbons. . The positively charged end of the N,N-dimethylformamide molecule is surrounded by methyl groups, forming a steric hindrance that prevents negative ions from approaching and only associates with positive ions. Bare anions are much mor... -
Phenol | 108-95-2
Product Description: Product specification: industrial grade, general grade. Usage: phenol is an important organic chemical raw material, which can be used to make phenolic resin, lactam, bisphenol A, and other chemical products and intermediates.In addition, phenol can be used as a solvent. Package: 180KGS/Drum or 200KGS/Drum or as you request. Storage: Store at a ventilated, dry place. Executive Standard: International Standard. -
Cyclopentane | 287-92-3
Product Description: Cyclopentane is a colorless, transparent, pungent liquid. Insoluble in water and miscible with alcohol, ether, ketone and benzene. It is very easy to burn and volatile. In case of heat or open flame, it is dangerous to burn and explode, and can form explosive mixture with air. Contact with strong oxidant is prone to biochemical reactions or cause combustion and explosion. Item Index Cyclopentane mass fraction% ≥ 95.0 n-hexane mass fraction%... -
Acetone | 67-64-1
Product Description: Acetone is extremely flammable, easy to produce drugs, and irritating.Its steam and air can form an explosive mixture, in the case of open fire, high heat easily combustion explosion.Can react strongly with oxidants.Its steam is heavier than air and can spread to a considerable distance at a lower level.In case of high heat, the pressure in the container increases, there is a risk of cracking. Package: 180KGS/Drum or 200KGS/Drum or as you request. Storage: Store at a vent... -
Cyclohexane | 110-82-7
Product Description: (1) Cyclohexane can be used as a solvent for rubber, paint, varnish, adhesive diluent, oil extraction agent. (because of the toxicity of this product is small, it is often used in place of benzene to remove grease, grease and off paint. 98% of cyclohexane is mainly used for manufacturing nylon monomer (adipic acid, hexamethylene diamine and caprolactam), is also used in the manufacture of cyclohexanol and cyclohexanone ring material; (2) Cyclohexane can be used as analyti... -
Phthalic anhydride | 85-44-9
Product Description: Phthalic anhydride is an organic compound with the chemical formula C8H4O3. It is a cyclic acid anhydride formed by intramolecular dehydration of phthalic acid. It is a white crystalline powder, insoluble in cold water, slightly soluble in hot water and ether, and soluble in Ethanol, pyridine, benzene, carbon disulfide, etc. are important organic chemical raw materials and important intermediates for the preparation of phthalate plasticizers, coatings, saccharin, dyes and... -
4-Chlorobenzotrifluoride | 98-56-6
Product Description: This product is used to synthesize medicine fluralin, ethamflurane, pesticide fluoroester oxamethoxam, fluoxamid, and carboxyfluoroether herbicides; in addition, it can also be used in the dye industry. Package: 180KGS/Drum or 200KGS/Drum or as you request. Storage: Store at a ventilated, dry place. Executive Standard: International Standard.
