-
1-Butanol | 71-63-3
Product Physical Data: Product Name 1-Butanol Properties Colorless transparent liquid with special odor Melting Point(°C) -89.8 Boiling Point(°C) 117.7 Relative density (Water=1) 0.81 Relative vapour density (air=1) 2.55 Saturated vapour pressure (kPa) 0.73 Heat of combustion (kJ/mol) -2673.2 Critical temperature (°C) 289.85 Critical pressure (MPa) 4.414 Octanol/water partition coefficient 0.88 Flash point (°C) 29 Ignition temperature (°... -
Methyl alcohol | 67-56-1
Product Physical Data: Product Name Methyl alcohol Properties Colourless transparent flammable and volatile polar liquid Melting Point(°C) -98 Boiling Point(°C) 143.5 Flash point (°C) 40.6 Water Solubility miscible Vapour pressure 2.14(mmHg at 25°C) Product Description: Methanol, also known as hydroxymethane, is an organic compound and the simplest saturated mono alcohol in structure. Its chemical formula is CH3OH/CH₄O, of which CH₃OH is the structura... -
1-Propanol | 71-23-8
Product Physical Data: Product Name 1-Propanol Properties Colorless liquid with an alcoholic taste Melting Point(°C) -127 Boiling Point(°C) 97.1 Relative density (Water=1) 0.80 Relative vapour density (air=1) 2.1 Saturated vapour pressure (kPa) 2.0(20°C) Heat of combustion (kJ/mol) -2021.3 Critical temperature (°C) 263.6 Critical pressure (MPa) 5.17 Octanol/water partition coefficient 0.25 Flash point (°C) 15 Ignition temperature (°C) 3... -
Ethylene Glycol | 107-21-1
Product Description: Ethylene glycol is the simplest diol. Ethylene glycol is a colourless, odourless, sweet-odoring liquid with low toxicity to animals. Ethylene glycol is miscible with water and acetone, but is less soluble in ethers. It is used as solvent, antifreeze and raw material of synthetic polyester. Polyethylene glycol (PEG), a polymer of ethylene glycol, is a phase-transfer catalyst and is also used for cell fusion; its esters of nitrate are a kind of explosive. Product Ap... -
Glycerin | 56-81-5
Product Physical Data: Product Name Glycerin Properties Colorless, odorless viscous liquid with a sweet taste Melting Point(°C) 290 (101.3KPa); 182(266KPa) Boiling Point(°C) 20 Relative density (20°C) 1.2613 Relative vapour density (air=1) 3.1 Critical temperature (°C) 576.85 Critical pressure (MPa) 7.5 Refractive index (n20/D) 1.474 Viscosity (MPa20/D) 6.38 Fire Point (°C) 523(PT); 429(Glass) Flash point (°C) 177 Solubility can absorb h... -
Ethyl Alcohol | 64-17-5
Product Physical Data: Product Name Ethyl Alcohol Properties Colorless liquid, with wine fragrance Melting Point(°C) -114.1 Boiling Point(°C) 78.3 Relative density (water=1) 0.79 (20°C) Relative vapour density (air=1) 1.59 Saturation vapour pressure (KPa) 5.8 (20°C) Heat of combustion (kJ/mol) 1365.5 Critical temperature (°C) 243.1 Critical pressure (MPa) 6.38 Octanol/water partition coefficient 0.32 Flash point (°C) 13 (CC); 17 (OC) Ign... -
Industrial Spirit | 64-17-5
Product Parameters: Industrial Spirit content is generally 95% and 99%. However, industrial alcohol often contains a small amount of methanol, aldehydes, organic acids and other impurities, which greatly increases its toxicity. Drinking industrial alcohol can cause poisoning and even death. China expressly prohibits the use of industrial alcohol to produce all kinds of alcohol. Product Description: Industrial alcohol, i.e. alcohol used in industry, is also known as denatured alcohol... -
Lithopone | 1345-05-7
Product Description: 1.Mainly used in latex paints, water-based paints, inks, rubber, plastics, etc., replacing 30% of rutile-type titanium dioxide in latex paints, still maintaining the original film properties, and has the effect of reducing costs. 2.Inorganic white pigment. Widely used as a white pigment for plastics, paints and inks such as polyolefins, vinyl resins, ABS resins, polystyrene, polycarbonate, nylon and polyoxymethylene. 3.Used for coloring rubber products, varnishes, le... -
Pentaerythritol | 115-77-5
Product Description: Pentaerythritol 95%98% CAS No. 115-77-5is mainly used in the coatings industry and can be used to make alkyd coatings, which can improve the hardness, gloss and durability of coating films. It is also used as a raw material for rosin greases such as paints, varnishes and printing inks, and can be used for drying oils, smoldering coatings and aviation lubricants. Fatty acid esters of Pentaerythritol 95%98% CAS No. 115-77-5are highly effective lubricants and polyvinyl ... -
Hydrocarbon Resin
Product Description: C9 hydrocarbon resin is a petroleum by-product of pyrolysis C9 fraction which is produced by pre-treatment, polymerization and distillation processes. It is not a high polymer but a low polymer molecular weight between 300-3000. It has the characteristics of low acid value, good miscibility, water,ethanol and chemical resistance, the chemical stability against acid, the good adjustment of viscosity and thermal stability. Generally, 9 hydrocarbon resin is not used alo... -
Petroleum Resin C9 | 64742-16-1
Product Description: Usage: 1. Coating production: Used in paint and reinforced latex coating, also applied in oil soluble coating. 2. Rubber treatment: Used as adhesion booster. 3. Adhesive production: Used in adhesive, especially for melting glue and pressure-sensitive glue. 4. Printing ink production: It can be dissolved in hydrocarbon resin, it owns high soft point and stable performance, so it can be used in ink. 5. Paper making industry: Used in paper sizing agent. 6. Other applica... -
Petroleum Resin C5
Product Description: Petroleum Resin C5 begins to gradually replace natural with its high peeling strength, fast viscosity, stable bonding performance, moderate melt viscosity, good heat resistance, good compatibility with polymer matrix, and low price. Resin tackifier (rosin and terpene resin). The characteristics of fine Petroleum Resin C5 in hot melt adhesive: good fluidity, can improve the wettability of the main material, good viscosity and outstanding initial tack properties. Excellent ...
